How to the OMAPFLASH Increase download support on the mobile phone platform.Thanks Phoen Hardware solutions:CPU-OMAP4430+FLASH-SDIN5C2-8G Download tool:OMAPFLASH The main goal when trying to get OMAPFlash to work on a new plaform is to get the second loader ported to the platform. In general this should not require the recompilation of the code or modification of the second loader's code base. The starting point will be to create a board configuration file for the new platform. For the binary installed version of OMAPFlash, board configuration files are found in. Targets Configurations.
For the source code version of OMAPFlash, board configurations files are found in. Host Targets Configurations.
In order to add support for a new platform it is necessary to add a new board configuration file to the configuration folder. Once the board configuration file has been created, it will need to be added to the content of omapflash2nd.txt, present in. Of the binary release. Host of the source code release.
This file allows OMAPFlash to find the board configuration file and pairs it with a platform tag to be used with the -p option for OMAPFlash. All content and materials on this site are provided 'as is'. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
Jul 1, 2016 - How do you get your old serial number if you bought a digital copy way back in 2010. I have a copy of the original receipt but can't get an.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.
Contents. TI Flash and Boot Utilities The following software supports the OMAP-L138, C6748, and AM1808 families of devices. This package contains a set of utilities running from the command-line on Windows for flashing the NAND, NOR, and SPI Flash of the OMAP-L138 EVM via the serial port. The Serial Flashing Host Utility (which offers the same functionality as a previous program called DVFlasher) executable is called sfhOMAP-L138.exe. These programs each encapsulate a distinct binary UBL which is transferred via the UART. This implies that the chip must be operating in the UART boot mode, showing the BOOTME prompt. NOTE: The assumption is made that the UART of the device operates at 115200, 8N1.
If the oscillator used with the device does not match the one used on the EVM (e.g. On a custom platform), the baud rate assumption may be incorrect. Obtaining the software The latest source code and binaries can be download from. Note that for flashing UBLs from PSP releases 03.20.00.13 and earlier, v2.29 of the serial flasher should be used. For flashing UBLs from PSP releases 3.20.00.14 and later, the latest version of the serial flasher should be used. Compiling A makefile is included for compiling the host and target parts of each utility.
The target portions are built first since they are embedded into the the host executables. These target portions are loaded to the OMAP-L138 device via the UART boot mode.
Note that the pre-built executables have been tested to work on the EVMs. It is not necessary to rebuild them unless changes need to be made for a custom board. Under Windows Please see the following page for detailed instructions for rebuilding the utilities in included in this package: Under Linux The Mono Framework must be installed and in the path. RPMs are available at '. The below instructions assume the that GNU ARM cross-compiler tools (arm-arago-linux-gnueabi-gcc, etc.) are in the current PATH. The C6x Compiler Tools are also required to build some components.
These are available free of charge. You will need to add the bin directory to your PATH and to set the environment variables as directed by the installer.
Edit the build.mak file under Common directory and add the paths to ARM and C6x compilers. Then go to the GNU directory of the package and run: make Running Under Windows This utility can be run from the command line under Windows with the.Net Framework 2.0 or later installed through the following steps:.
Set the boot pins to UART2 boot mode. This is done by setting switch S7 on the LogicPD OMAP-L138 EVM according to the following table: Pin# 1 2 3 4 5 6 7 8 Position OFF OFF OFF OFF OFF OFF ON ON For Spectrum Digital EVM: Pin# 1 2 3 4 5 6 7 8 Position OFF OFF OFF OFF OFF ON OFF ON. Connect a serial cable from the host computer to the OMAP-L138 EVM. Open a command prompt on the host computer and change directory to where the SFH executable is located.
Run the flashing utility with this command:. OMAP-L138 gnu sfhOMAP-L138.exe options.
Adobe Flash Installer Downloads
Turn on the board Under Linux The serial flasher can be run on a Linux machine with the latest open-source Mono Framework installed. The steps are identical to the Windows environment except the command:. mono./sfhOMAP-L138.exe options Serial Flasher Options There are three modes for using the serial flasher:. Erase the target flash type - This will erase the entire contents of the flash.
SfhOMAP-L138.exe -erase. Flash the memory with a single application image - This will place an application image at address 0x0 of the flash. This must be an AIS format binary, which can be created with the AISgen utilities bundled with the and.
SfhOMAP-L138.exe -flashnoubl. Flash the memory with a UBL and application image - This will place a UBL at address 0x0 of the flash and an application image, such as u-boot, at address 0x10000. In general, a UBL is not required, and this mode is only used when restoring the default flash contents, as explained in the following section.
Omap Flash Installer 4430 Download
SfhOMAP-L138.exe -flash For C6748 devices, use the following option: '-targetType C6748' For AM1808 devices, use the following option: '-targetType AM1808' Note: Only the UBL found in the OMAP-L138/GNU/UBL directory can be used with the serial flasher. Other UBLs are not compatible with the serial flasher format. Note: ' The 'flashnoubl' and 'flash' options will automatically erase the necessary amount of memory in order to fit the UBL and/or application image. Currently, the only supported flash types are NAND, NOR, and SPI.